Gate Frames

We can design and build a new gate frame for you.

Gate Frames Brisbane


Our Gate Frames are usually made to order, however we do have stock on hand for standard sizes.

Griffin Fencing’s Most popular style of gate frame is the Timber Paling and picket fence gate frame.

We can also make frames for Chain Wire Gates as well as any Rural styles.

Our Gate Frames are build to last and manufactured as a single and in sets o two for larger openings. After making your gates all welds are liberally coated with a Cold Gal Paint to inhibit rusting.

When placing an order with us, we will need the width the height of the opening.

If you want the frame to come with hinges, then we need to know what side they need to be welded to and the direction of opening for the new gates.

We also supply our steel gate frames with Pad Bolts, D Latches, Drop Bolts.

Most of our Gate Frames are built for the timber pickets and palings overhang the frames, the top of the paling/picket by around 100mil the under side by approximately 200mil.

The extra on the under side of the gates is for the palings and pickets to be cut to suit the fall of the ground around your gate. We can also build Angled or Raked Gate Frames, to suit your particular ground slope or angle.

Our Gates use Galvanised steel in the manufacture of all our Gate Frames.

The steel we purchase comes to us already galvanised, inside and outside, of the box section.

We believe in realistic prices for our customers so you will find it dificult to find quality gates and gate frames in Brisbane that match our prices.

We can deliver your new gate frame throughout the Brisbane area for a small fee.


gate frame

Quality Designs

Expert Team

Steel Gate Frames

Message Us

Contact us for a free quote

Call Us

(07) 0000 0000

Office Location

Brisbane, QLD

Open Hours

M-F 9:00am – 5:00pm